reference plane
英 [ˈrefrəns pleɪn]
美 [ˈrefrəns pleɪn]
网络 参考平面; 基准面; 参考面; 对其最接近的相关层; 参照平面
双语例句
- Be like, wear systematic plate to light steel plasterboard, dust special board, the tool reference plane such as splint is stickup and indoor ceramic tile result is favorable.
对于轻钢架系统板材如石膏板、埃特板、夹板等基面粘贴室内瓷砖效果良好。 - The Applied Anatomy Research of LeFort I Osteotomy Reference Plane
LeFortⅠ型截骨术定位平面的应用解剖学研究 - This paper also derives some theortiacl formulas of the working reference plane attitude error through the error separating and compensating technology, which is proved by an experiment system.
在惯导系统一般的误差动态方程和速度观测方程的基础上，建立了姿态传递对准所必需的弹、舰相对姿态误差方程和观测方程。 - Strike is the trace of the intersection of an obliquely inclined plane with a horizontal reference plane.
走向是倾斜平面与水平参考成交线的迹线。 - Generation of Approximate Epipolar Images from Linear Pushbroom Satellite Stereo-imagery Based on Projection Reference Plane
基于投影基准面的线阵推扫式卫星立体像对近似核线影像生成方法 - Use to indicate a site reference plane.
用于表示位置基准面。 - This paper has put forward the method to build mould of location reference plane in CADF, and on this foundation has analyzed the influence of positioning error for workpiece geometry precision. It has offered theory foundation for correcting and improving fixturing design.
提出了在计算机辅助夹具设计（CAFD）中定位参考面的建模方法，并在此基础上分析了定位件位置误差对工件几何精度的影响，为校验和改进夹具设计提供了理论基础。 - The complex amplitude of light wave fields in the reference plane vertical to optical axis
光波场在垂直光轴方向的参考面上的复振幅研究 - The results achieved by FEM were stable, and irrelevant to coordinate system and reference plane.
用FEM进行人颅颌面生长发育研究，其结果是恒定的，与坐标系的选择和参照平面无关。 - For GEO with near zero inclination, the GPS broadcast ephemeris parameters fitting may be unsuccessful. But the Kepler orbit parameters fitting method will works well in a new reference frame with difference reference plane.
针对GEO卫星在小倾角情况下，广播星历可能拟合失败的情况，本文提出了改变坐标系参考轨道面，在新的坐标系下拟合广播星历的方法。 - Preliminary study of profile cephalometric analysis based on a vertical reference plane
应用垂线参考平面图法进行面部头影测量分析的初步探讨 - The stacking theoretic model calculation and analysis for the static and NMO correction of the seismic record in CMP gather at the slip reference plane
地震共中心点道集的滑动基准面静校正和动校正叠加理论模型计算和分析 - CAFD-based location reference plane modeling and error analysis
基于CAFD的定位参考面建模及误差分析 - Based on measuring the reference plane, the approach analyses the errors of some measure points on it, finds the relationship between the errors and the distortion coefficients of camera lens. Then the distortion coefficients of camera lens are determined by iterative optimization.
从参考平面的测量出发，考察其上的若干测量点，找到其变形与摄像机镜头畸变系数的函数关系，进行最优迭代求解，进而确定摄像机镜头畸变系数。 - Location Reference Plane Modeling and Error Analysis Based on CAFD
计算机辅助夹具设计的定位参考面建模与位置误差分析 - Boundary points are calculated using a reference plane characteristic scheme with the viscous terms treated as source terms.
边界点采用参考平面特征线格式计算，粘性项作为源项处理。 - Starting from the wave differential equation, a method is deduced to express the complex amplitude of light wave fields in the reference plane which is vertical to the optical axis.
从波动微分波动方程出发推导光波场在垂直光轴方向的参考面上的复振幅表示。 - The chamber-nozzle subsonic-transonic flowfield of solid rocket motor is computed by time-dependent method. The governing equations are numerically solved by MacCormack explicit scheme. The parameters of boundary points are calculated with physical boundary conditions and characteristic equations on the reference plane.
本文用时间相关法计算了固体火箭发动机燃烧室&喷管亚跨声速流场数值解，控制方程用MacCormack二步显格式：边界点参数用物理边界条件和参考平面上的特征方程计算。 - The reference plane should be shifted with the moving of the aperture in the element.
同时分析了参考平面移动的条件，指出参考平面的移动必然伴随着光阑位置的移动。 - As the electrical grating is projected on the measuring object or a reference plane, images can be collected by CCD, and the data of images can be transferred to the computer and be saved by using a video collection card.
将电子光栅投影到被测物或参考面后，使用CCD进行图像采集，并通过视频采集卡将采集的图像数据传到计算机中保存。 - The emphasis of field experiment and study is put on the determination of projection reference plane and image control point as well as quick mapping technique.
野外试验和研究的侧重点是确定投影基准面，像控点及野外快速编录技术。 - With the polarization beam produced by double focus lens reflecting by the detection plane, the described optical profiler forms a commonpath interference system, so a nondestructive detection for the ultra smooth surface can be carried out by the interference system without standard reference plane.
所述的光学轮廓仪是利用双焦透镜产生的偏振光束经被检面反射后形成了一共路干涉体系，因此该干涉体系可对超光滑表面做非接触无损检测而无需标准参考面； - Like this, following stack; velocity analysis; migration imaging and time-depth conversion of section can all go forward in this datum, avoiding error result from smooth plane of surface elevation substituting CMP reference plane.
这样，后续的叠加、速度分析、偏移成像及剖面的时深转换都可在这个基准面上进行，避免了以地表高程的平滑面代替CMP参考面的误差。 - It is a effective way using an aligned beam as a baseline and scanning a 90 ° pentagonal prism to establish a datum reference plane in large dimension measurement.
用一准直光束作为基线，通过90°折转的五角棱镜扫描，建立一个参考基准面在大尺寸测量中是一种行之有效的方法。 - A current method of the plane metrology is to measure the geometrical entities on a scene plane ( referred as the reference plane) via the homography between the plane and its projected image.
一种常用的单视测量方法是通过获取图像平面与空间场景平面（参考平面）之间的单应性矩阵实现对该平面上几何量的测量。 - Firstly, the work theory of normal taper was analyzed. Based on this, the cutting trajectory of upper and lower surfaces is calculated according to the shape information of the reference plane.
本文首先分析了常规锥度加工中电极丝的运动轨迹计算原理，在此基础上实现了根据参考平面轨迹计算得到电极丝在工件上下表面的运动轨迹。 - Based on the scalar diffraction theory, in-depth discussion of the reference plane at the field distribution.
基于标量衍射理论，深入讨论分析了参考平面处的场分布情况。 - Based on the three dimensional echocardiography, a reference plane of mitral annulus was proposed to eliminate the global motion, and provide a reference plane for measurement the static and dynamic parameters of the mitral annulus.
本文基于实时三维心脏超声图像，提出二尖瓣环最佳参考平面用于消除二尖瓣整体运动的影响，并对二尖瓣在心动周期内运动提供一个可靠和理想的测量参考平面。 - It adopts the helical scan to eliminate the material function and the change reference plane law has realized the precision high three dimensional modelling using API provided by SolidWorks and VB.
利用SolidWorks的应用程序开发接口（API）结合VB语言采用螺旋扫描除料函数和改变参考平面法实现了精确度较高的三维造型。 - It is obviously that to take TRL calibration method can really eliminate a portion of loss of the test fixture, and indeed, the reference plane is moved to the DUT around by this way.
可以发现在4GHz时TRL校准测试消除了一部分夹具损耗，且对直通件进行评估发现，测量参考面确实移动到了被测件附近。